Name: Beta75X 2S Whoop Quadcopter (6A ESC)
SKU: 1418895

We are sorry to announce that 6A ESC version Beta75X drones is discontinued and will not be available for sales anymore. We recommend you buy its great alternative .

Note:

Use the 6A BLHeli_S ESC
No
Use the

Let's see the Epic Dive Video by Wayne Ho !!

A detailed review of the Beta75X drone by on YT.

See how fast the 2S whoop drone is. Video by .

Another overview and flight video by .

For more video about these 2S Whoop drone, please check here:

Have any questions about 2S Whoop drone, please join our group on Facebook:

Join the online discussion about 2S Whoop drones at RCGroups.com:

The big brother Beta75X is available too.

Bullet Point

Beta75X start a new era of 2S whoop drones. With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.
With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing pro.
Durable and light enough frame is customized for the Beta75X. A total weight of 41g give pilots a good balance of weight and nice punch on 2S battery.
Whole drone no soldering or tinkering necessary. Customized lightest 1103 11000KV motors with cable connectors. Just plug and play.
350mAh 2S high rate battery is recommend by default. But pilot could also use their whoop batteries with a replaced power cable. Optional and affordable.

Specification

Weight: 41g (without battery)
Motors:
Props:
Camera:
Receiver Option: / / /
Battery: (Stock battery)/
Flight time: 2 minutes and a half with 350mAh 2S battery (smooth flight in a windless environment)

FC SPECIFICATIONS

Find more details about this in another page.

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX

ESC SPECIFICATIONS

Find more details about this in another page.

Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S Lipo
Continue current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G

Z02 AIO Camera VTX

Find more details about this in another page. On the Beta75X, it is the customed version with VTX board and camera board split.

Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens

Props Out

The Beta75X drone comes with "props out" in default. Why we need "props out" direction?

Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.

Power Cable

There are 2 choices for the Beta75X battery. For the best performance, we recommend a 2S 350mAh battery with XT30 connector. If you already have many 1S whoop style batteries and want to use them on the Beta75X drone, then we also provide a PH 2.0 option for you. The two 300mAh Lipo HV 1S batteries can be inserted into the slot with the help of an adapter, as seen below.

Customized Z02

The AIO camera VTX on the Beta75X is a customized version of Z02. The VTX board and camera board are split and 35 degree camera mount for more fast flying. At the same time, it have all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

How to change the frequency or output power via remote control, please check the manual Smart Audio.

Download the for the camera mount.

How to fix your Z02 camera if the image is blurred or the lens is loose after crashes?

How to remodel Beta75X for the micro drone to HD shooting machine, please click the article written by .

FAQ

1. Update about the LED at the rear for Beta75X

The FC board is now upgraded to V1.2. It can support programable LED like WS2812 etc. The LED holder is designed on the 75X frame nowadays.

Note: there is NO rear LED holder for Beta65X in default.

2. I am interested in connecting an HD camera and DVR, but I don't want to overload the circuit of 5V.

The 5V regulator on the FC board could handle 2A of load. So you could use it for HD camera or DVR board. More details, please check the .

3. Does this drone have current sensor?

This drone does NOT have a real current sensor. We use the virtual current meter in Betaflight. When properly calibrated, it can be accurate enough to be useful. Here is the pre-calibrated value out of the box.

set current_meter = VIRTUAL
set ibatv_scale = 90
set ibatv_offset = 29

4. How to connect the receiver to the 2S brushless FC?

Please don't forget to plug the battery when you try to connect the connector to the 2S brushless FC. Find out more details in our .

5. Cli Dump for different versions of the 2S Whoop are provided in our .

6. For some reason whenever i turn off and turn back on the quad vtx resets to 25mw even if i save the setting.

The button and SmartAudio cannot be used at the same time. You can either change the vtx setting by button or SmartAudio.

If you only use the button, you can find SmartAudio on the Ports page and set it to Disabled.
If you only use the SmartAudio, you can find more details to know how to do this.

7. ETA of my 2S whoop drones.

We know that you guys can't wait to get this little monster and want to know about the ETA. Check out the shipping information .

8. How to set up smart audio vtx control? ( gives you the most straightforward explanation)